Lucite Solutions

From the Blog

Precautions To Take While Operating A Crane

Hey there, crane operator! Just wanted to give you a heads up on some things to be cautious of while you’re up in that cab. There are some precautions you need to take, or else bad things could happen. Here are the most important things to keep in mind while operating a crane. So read on, and enjoy!

Do Not Over Load The Crane

First and foremost, always double-check the load you’re lifting. Make sure it isn’t too heavy for the crane to handle, and that the rigging is secure. The crane operator should never try to lift a load that’s too heavy, as it can cause the crane to tip over, or even worse, the load could fall and injure someone.

Overloading a crane has resulted in some of the most disastrous accidents in crane history. In 2015, a construction crane in New York City collapsed while lifting an air conditioner unit, killing one person and injuring three others. The investigation revealed that the operator had overloaded the crane by nearly 20%.

Never Swing The Load Side to Side

This may seem like common sense, but you’d be surprised how many accidents are caused by crane operators swinging the load back and forth. Not only is this dangerous for the people below, but it can also damage the load itself. If you’re not careful, you could end up dropping the load or smashing it into something.

Do Not Operate A Crane In Dangerous Conditions

Whenever operating a crane, it’s important to be aware of the surrounding conditions. If it’s raining, windy, or foggy, you should postpone the lift. These weather conditions can make it difficult to see and operate the crane safely.

Inspection And Maintenance

It’s important to keep your crane in good condition by performing regular inspections and maintenance. This will help you avoid any mechanical issues that could lead to an accident.

  1. Regular inspection can help you detect problems with the crane before they become serious. If you notice that there is something wrong with your crane, you can get it repaired immediately without any delay. 

This way, you can save yourself from any possible accident at the construction site because if you do not take care of such minor issues then they will become major problems later on.

  1. Regular maintenance will ensure that your crane works efficiently throughout its lifetime. You do not want a situation where your crane stops working in an emergency situation when there are heavy loads being lifted or transported by it. 

So it is better to keep a regular check on your equipment so that you can avoid such situations in the future and make sure that all your cranes are running perfectly fine when needed at the construction site.

Use Safety Devices Properly And At All Times

There are various safety devices that should be used when operating a crane. These include the load limit switch, emergency stop button, and overload protection device. You should also make sure to wear the proper safety gear, including a hard hat, gloves, and steel-toed boots. There are very few companies who prcatice all safety precautions and its difficult to trust any crane hiring company with all the sub-standard safety measures. But excavator hire sydney practices all these safety measures and makes sure that the professionals they send for exacativion are well -trained in handling and operating the crane. 

Cranes can be dangerous pieces of equipment if not operated correctly. By following the safety precautions we have outlined in this blog, you can help ensure that your time using a crane is safe and productive. 


Leave a Reply

Your email address will not be published.